Skip to Content
ZF Engineering
עב 073-321-4170 Talk to an engineer

Machining technologies, end to end

Know-how. Tools. Support.

From the CAM program to the tool on the spindle - with 50 years of experience and local technical support.

Talk to an engineer All solutions

Free initial consultation.

The entire machining chain, under one roof

Software, tools, toolholders, workholding and measurement from 21 manufacturers we officially represent, so the whole system works together. That is also why we can see where your time really goes.

Six links, one team

CAM software screen with a toolpath simulation on an impeller, next to the machined impeller

CAM software and simulation

ESPRIT EDGE and NCSIMUL by Hexagon. Programming from 2.5 to 5 axes, Swiss-type machines and collision checking before the run, with a team that knows both the software and the machine.

HEXAGON

More about CAM software
A robot arm welding a tube frame mounted on a positioner

Robot programming

Offline programming with Robotmaster for industrial robots in welding, polishing, grinding and cutting, without a robotics expert on the team.

Robotmaster (Intercam)

More about robot programming
End mills, a drill and a tap standing in a tool rack

Cutting tools

End mills, drills, taps, inserts and diamond tools from eight manufacturers, including Swiss Blue Tech, Israel's Erojet and Worldia.

SWISS BLUE TECH · WORLDIA · SCAMI-ALVAN · EROJET · BELZ · WINSTAR · Y.T YIH TROUN · PRECISE

More about cutting tools
Toolholders and an angle head on a tool cart

Toolholders and accessories

Toolholders, angle heads, anti-vibration turning holders and modular drilling systems.

MONGTEC · Cutoutil · Stanny · Monkula

More about toolholders
A vise clamping an aluminum block on a workholding system on the machine table

Workholding and clamping

Zero Point systems, fixture plates, magnetic chucks and modular hydraulic workholding.

INNGRIT · SAFEWAY · KAI CHENG · MIWE · Grand-E-Light

More about workholding
A measuring probe with a ruby ball touching a machined part inside the machine

Measurement and grinding

Measuring systems and probes for CNC machines, and benchtop drill and end mill grinders.

JIZHI MEASUREMENT · SHARP ONE

More about measurement

Engineers who stand by the machine

One supplier for the whole chain
Software, tools, toolholders, workholding and measurement from 21 manufacturers, working together.
Local technical support
Engineers who come to the machine, tune parameters and train your team in Hebrew, and stay available after the run.
50 years of experience
Decades in manufacturing, CAD/CAM and cutting tools. That experience stands behind every recommendation.

From selection to the first run, and beyond

  1. We understand the challenge

    Material, geometry, tolerances and production rate.

  2. We choose a solution

    Tools, parameters and software, from the full range.

  3. We implement and train

    On your production line, with your team.

  4. We keep improving

    We analyze results and optimize over time.

21 manufacturers. Official representation.

As direct representatives, we support you from choosing the tool to implementing it, and we will tell you when another brand suits you better.

  • HEXAGON
  • Robotmaster
  • SWISS BLUE TECH
  • WORLDIA
  • SCAMI-ALVAN
  • EROJET
  • BELZ
  • WINSTAR
  • Y.T YIH TROUN
  • PRECISE
  • MONGTEC
  • Cutoutil
  • Stanny
  • Monkula
  • INNGRIT
  • SAFEWAY
  • KAI CHENG
  • MIWE
  • Grand-E-Light
  • JIZHI
  • SHARP ONE
Every brand and manufacturer website

50 years of experience, passed down through generations

It started at home. Yefim and Boris Zilberberg's father worked in machining, and the two grew up among machines, chips and drawings. Together they founded ZF Engineering, and today the third generation leads it.

  1. First generation

    Their father, a machinist. This is where the know-how began.

  2. Second generation

    Yefim and Boris founded ZF Engineering, specializing in CAD/CAM, machine design and cutting tools.

  3. Third generation

    Leads the company today, adding CAM software, robotics and project support.

The full story and the team
  • APKT
  • RDMT
  • SDMT
  • SEKT
  • SNMX

Coming soon: milling bodies made by ZF

A new production line for end mill and face mill bodies made of hardened steel, for the standard inserts on the market. Want to be among the first to test them on your shop floor?

Join the test program

Knowledge

All articles

Tell us what you machine

Material, machine and the problem: that is all it takes to start. A free initial consultation, with the person who will later come to your machine.

073-321-4170
Write to an engineer office@zf-eng.com