Program faster. Run without surprises.
ESPRIT EDGE for programming, NCSIMUL for checking the code before it reaches the machine. We sell, implement and support both in Israel, and our team knows both the software and the machine it will run on.
HEXAGON / CAM
Most shops run several types of machines: a machining center, a lathe, perhaps a Swiss-type or a multitasking machine. With ESPRIT EDGE you program all of them from the same environment, with the same tool library and the same way of working.
The key difference is that the software "knows" the machine. It works with a full model of the machine's kinematics, limits and tools (Digital Twin), so it checks for collisions while you program.
ProPlanAI proposes a complete machining process based on the geometry, the material already removed and earlier steps in the program. Since version 2026.1 it is also available for turning, Mill-Turn and Swiss. The programmer still decides, but starts from a point much closer to the final program.
OEM-approved post-processors, verified against the machine's kinematics. The goal: G-code that goes from the software to the machine with no manual fixes at the control.
Shops that program several types of machines and want one system, makers of complex parts (aerospace, medical, defense) and Swiss shops looking for stable, fast programming.
HEXAGON / SIMULATION
A crash on the machine costs a spindle, a tool, a part and days of downtime. NCSIMUL runs the real G-code, the same file that will be sent to the control, on a full digital model of the machine, the tools and the stock. That is how you find collisions, gouges and program errors before the run.
It works with any CNC machine and any CAM software. If you already use another CAM system, you do not need to replace it to use NCSIMUL.
Simulation, verification and optimization of CNC programs on a Digital Twin of the machine.
Optimization of cutting conditions, less "air cutting" and longer tool life, which shortens cycle times without touching the geometry.
Automatic conversion of a program from one machine to another, or from one control to another, without reprogramming. Useful when moving work between machines by load.
Automatic documentation for the shop floor, and simulation viewing for people who are not programmers, such as the operator or the shift supervisor.
What's new: the 2026 release adds Selective Simulation, for quickly checking the critical steps of a long program, and GPU-accelerated rest stock previews (Rest Stock). Full simulation remains for final approval.
Who it is for: shops with expensive machines or long run times, work on expensive parts or costly raw material, and anyone still doing a manual Prove-out on the machine.
Program the toolpaths and get G-code ready for your machine.
Run the code on a full model of the machine and find collisions before they happen on the floor.
What is your situation?
ESPRIT EDGE writes the program: program the toolpaths and get G-code ready for your machine.
NCSIMUL checks the program. It works with any CAM software, so there is no need to replace the one you have.
Both together: ESPRIT EDGE writes, NCSIMUL approves.
Book a demo on your own part| ESPRIT EDGE | NCSIMUL | |
|---|---|---|
| What it does | Writes the program | Checks and improves the program |
| Input | CAD model | G-code (from any CAM system) |
| Collision checking | While programming, on the machine model | On the final code, as the control will run it |
| Optimization | Machining strategies and HSM | Cutting conditions and Optitool |
| Right for you when... | You need a CAM system, or are replacing one | You have CAM and want to remove the risk at the machine |
You can use either one on its own, or both together: ESPRIT EDGE writes, NCSIMUL approves. We will help you choose the configuration and modules that fit your machines and parts.
We match modules, post-processors and machine models to your shop.
We connect the software to your production environment, tool library and existing controls.
On the parts your team actually makes.
One address when something does not run, with people who also come to the machine.
And because we also represent manufacturers of cutting tools, toolholders and workholding, we see the whole picture: sometimes the problem is in the program, and sometimes in the tool or the fixture.
Yes. NCSIMUL checks the G-code itself, so it works with code from any CAM software and with any CNC machine.
ESPRIT EDGE checks for collisions while you program, based on the toolpaths. NCSIMUL runs the final G-code, after the post-processor, as the control will read it. It is the last check before the machine.
Yes. There is a dedicated module for Swiss machines, including different guide bushing configurations, and since 2026 also AI-assisted programming (ProPlanAI) for turning and Swiss.
Send us a file of a real part, and we will show you in a demo how it is programmed in ESPRIT EDGE and how it is checked in NCSIMUL.
ZF Engineering: local support in Hebrew, backed by Hexagon when needed.
Send a CAD file or a G-code program, and we will show you in a demo how it looks in ESPRIT EDGE and in NCSIMUL. Free initial consultation.
